Storage position when the moving truck is not working Electric moving truck, add distilled water according to the specified liquid level, do not add too much distilled water in order to prolong the water interval, add too much water electrolyte overflow will lead to leakage. The battery will generate gas during charging. Keep the charging place well-ventilated and without open fire. Oxygen and acid gas generated during charging will affect the surrounding area. Unplug the charging plug during the charging process will produce electric arc, after the charging off, unplug the plug. After charging, a lot of hydrogen is retained around the battery, and no open fire is allowed. The cover plate of the battery should be opened for charging.
Maintenance of terminal posts, wires and covers: only by professional technicians designated by the manufacturer. If it is not too dirty, you can wipe it with a damp cloth. If it is very dirty, it is necessary to remove the battery from the car, clean it with water and dry it naturally. It is more and more common for people to use electric stacker in the field of logistics such as factories, mines, workshops and ports, and its appearance provides help for people’s cargo handling work, and saves manpower and material resources. What is the solution to the failure of stacker and fork maintenance?
This may be the battery voltage is too low, and the motor brake is not adjusted well, the accumulation of debris between the commutator pieces of the motor caused by short circuit between the pieces will also cause this phenomenon. You can replace the battery, re-adjust the motor brake, and add new and clean lubricating oil. Check the lubrication status of electric forklift and engine or DC motor, and lubricate according to the lubrication point of forklift, add enough oil, gear oil and grease. Check the fastening condition of mechanical coupling parts of electric forklift truck, especially whether the connecting bolts and locking devices such as steering system, wheels and tires, lifting mechanism are fastened and correct.
Check whether the joints, lines and lighting of electrical parts are in good condition and connected. Whether the electric instrument and horn, light can work normally, whether the liquid level height of the electrolyte of the battery meets the requirements; Whether the relative density of electrolyte meets the requirements.
When the vehicle is not working, the storage is also very important. It should be noted that when the parking is not used, the forklift should be placed neatly, the door frame is slightly tilted forward to make the fork fall to the ground, and the chain is in a relaxed state. Before the engine flameout, the engine should idle, and then flameout; After the engine flameout, the hand brake must be tightened; In the low temperature season (below 0℃), cooling water should be discharged or antifreeze should be added to prevent the cooling system from freezing and cracking; When the temperature is below -15℃, remove the battery and move it indoors to avoid freezing and cracking; When the forklift is not used for a long time, the coolant should be put in the net, the battery should be removed, the forklift truck should be coated with anti-rust oil and covered with cloth and other cover.
Post time: Apr-19-2022